(877)904-7006
(877)904-7006

5W-20 8100 Eco Lite Full Syn

SKU: MTL109102
Brand: Motul
Scroll Down Page for Additional Product Details

Ordering Instructions
1. When you are ready to begin the order process, "Select Order Quantity" box below.
5W-20 8100 Eco Lite Full Syn
5W-20 8100 Eco Lite Full Syn
Product Details

5W-20 8100 Eco Lite Full Syn


TYPE OF USE


100% Synthetic "Fuel economy" engine oil specially designed for recent gasoline engines, naturally

aspirated or turbo-charged, indirect or direct injection, designed to use oil with low friction and very low

HTHS (High Temperature High Shear) viscosity (≥ 2.6 mPa.s).


Suitable for modern gasoline engines requiring a viscosity grade 20 and fuel economy lubricant (API SP-RC,

SP and/or ILSAC GF-6a standards).


Approved GM-dexos1™ GEN2 for all new GM gasoline engines requiring this approval: BUICK, CADILLAC,

CHEVROLET, GM, GMC, OPEL and VAUXHALL.


Catalytic converter friendly.


This type of oil may be unsuitable for use in some engines. Refer to the owner manual if in doubt.


PERFORMANCES


STANDARDS API SERVICE SP-RC

ILSAC GF-6a


APPROVALS GENERAL MOTORS GM dexos1 GEN2 under n° D10833IE103


PERFORMANCES CHRYSLER MS-6395, FORD WSS-M2C930-A, FORD WSS-M2C945-A, FORD WSS-

M2C945-B1, FIAT 9.55535-CR1


RECOMMENDATIONS ACURA, FIAT, HONDA, HYUNDAI, INFINITI, KIA, LEXUS, MAZDA, MITSUBISHI,

NISSAN, SUBARU, SUZUKI, TOYOTA


The API SP standard is fully backward compatible over API SN requirements and all former API

standards. The API SP-RC "Resource Conserving" specification is even more demanding on the energy

saving requirements. API SP lubricants provide outstanding oxidation resistance, better anti-deposits

protection, better engine cleanliness, anti-wear protection and enhanced performance at cold temperature

for Fuel Economy savings during the whole oil life span. Besides being backward compatible, compare to

API SN and API SN Plus, the API SP standard provides higher performance and especially adds protection

against LSPI for downsized direct injection turbocharged gasoline engines.


Based on the API SP specification, the ILSAC GF-6a standard for viscosity grade 20 lubricants is even

more severe especially on the Fuel Economy benefits performance. The requirements on the low viscosity

"Fuel Economy" side of the lubricant, but also extended drain intervals, pistons/rings cleanliness, seals

compatibility and reduced content of Phosphorus for after treatment systems compatibility are enhanced.

The ILSAC GF-6a specification ensures perfect engine protection when gasoline containing up to 85%

Ethanol is used (E85).


GM dexos1™ standard is suitable for the whole range of GM Gasoline engines from Model Year 2011

onwards requiring an approved dexos1 lubricant (except for service fill in Europe). Specification GM

dexos1™ is designed for use with gasoline engines and replaces GM-LL-A-025, GM 6094M and GM

4718M. GM dexos1™ is also backward compatible for pre-2011 GM gasoline vehicles.


GM dexos1™ standard combines very stringent requirements from international standards like API, ACEA

and ILSAC, together with specific GM requirements to prove Fuel Economy benefits and engine durability.

GM has developed its dexos1™ standard in order for the oils to provide a high thermal stability and

insure an outstanding resistance at high temperatures to avoid black sludge and viscosity increase that

soot, coming from combustion residues, may create.


Turbocharged gasoline engines with direct injection have a certain risk of sporadic pre-ignition phenomena

in the combustion chambers. This type of sporadic abnormal combustion resembles metallic noise from

combustion chambers and is sometimes associated with a short power loss. This phenomenon called LSPI

for Low Speed Pre-Ignition, or also Rumble, generates very high pressure peaks in the combustion chamber

that can lead to piston damages and ultimately to engine destruction. For their latest-generation downsized

gasoline engines, which are equipped with direct injection systems and turbochargers, GM has developed

the dexos1™ GEN2 standard for engine lubricants in order to guarantee the perfect integrity of these

gasoline engines facing the risk of these abnormal combustions. Likewise, the API SP standard now fully

covers this LSPI requirement in order to perfectly protect direct injection turbo-charged gasoline engines.


Some OEMs require for their most recent Gasoline engines an API SP-RC, API SP, API SN, SN-RC,

SN Plus and ILSAC GF-6a or GF-5 lubricant to guarantee the maximum performance and durability.

The specifications CHRYSLER MS-6395 (GF-4 level), FORD WSS-M2C930-A (GF-4 level), FORD

WSS-M2C945-A (GF-5 level) and FORD WSS-M2C945-B1 (GF-5, SN-RC and SN Plus levels) reflect

these kinds of requirements. Within the FCA Group (Fiat Chrysler Automobiles), the FIAT specification

9.55535-CR1 mirrors this CHYSLER MS-6395 specification at Fiat.


MOTUL 8100 Eco-lite 5W-20 meets all these very highly demanding requirements of performance and

durability set by GM, including in particular for dexos1™ standard, the full compatibility to biofuels use

such as LPG (Liquefied Petroleum Gas), CNG (Compressed Natural Gas), and bioethanol (as available

at the station), when using ethanol biofuel at a mix ratio of up to 85% (Bioethanol – E85).


Viscosity grade SAE 5W-20 minimizes lubricant hydrodynamic friction, allows fuel economy benefits

especially when the oil is cold. Improves oil flow at start up, faster oil pressure build-up, faster rev raisings

and reach operating temperature faster. Environment friendly, this type of oil allows fuel consumption reduction

and therefore minimizes greenhouse gases (CO2 ) emissions.


RECOMMENDATIONS


Drain interval: according to manufacturers’ recommendations and tune to your own use.

MOTUL 8100 Eco-lite 5W-20 can be mixed with synthetic or mineral oils.

Before use always refer to the owner manual of the vehicle.


https://oehha.ca.gov/proposition-65

We are advised to inform customers purchasing products to be shipped to the State of California about Proposition 65- Prop 65 requires California to publish a list of chemicals known to cause cancer, birth defects or other reproductive harm. This list, which must be updated at least once a year, has grown to include approximately 900 chemicals since it was first published in 1987. The list may be accessed by visiting the website link above. 

All product brands, brand names, brand logo's and any such related marks mentioned or used on this website are considered legally registered trademarks and licensed products owned by their respective owners as such and use herein in no way indicates any relationship between the holders of said trademarks and Oil Depot, LLC.