(877)904-7006
(877)904-7006

5W-40 8100 X Clean Full Syn

SKU: MTL102786
Brand: Motul
Scroll Down Page for Additional Product Details

Ordering Instructions
1. When you are ready to begin the order process, "Select Order Quantity" box below.
5W-40 8100 X Clean Full Syn
5W-40 8100 X Clean Full Syn
Product Details

5W-40 8100 X Clean Full Syn


TYPE OF USE


High performance 100% Synthetic lubricant approved by many car manufacturers.


Specially designed for last generation cars, powered by Gasoline or Diesel engines, naturally aspirated

or turbocharged, indirect or direct injection, Euro 4, 5 or 6 emission regulation compliant, requiring an

ACEA C3 engine oil i.e. high HTHS (>3.5 mPa.s) viscosity and "Mid SAPS" with reduced content of

Sulfated Ash (≤ 0.8%), Phosphorus (0.07 ≤ x ≤ 0.09%) and Sulfur (≤ 0.3%).


Compatible with catalytic converters and Diesel Particulate Filters (DPF).


Before use always refer to the owner manual or handbook of the vehicle.


PERFORMANCES


RECOMMENDATIONS  HONDA, HYUNDAI, KIA, MITSUBISHI, NISSAN, SSANGYONG, SUZUKI


Engines compliant with Euro 4, 5 and 6 emission regulation are fitted with sensitive exhaust gas after

treatment systems. Indeed, Sulfur and Phosphorus inhibit catalytic converters operation leading to

inefficient exhaust gas treatment; and Sulfated Ashes clog DPFs leading to shorten regenerating cycle,

quick oil aging, higher fuel consumption and engine power loss.


The ACEA C3 standard requests from the lubricant significant oil film resistance and low emission

performance for powerful engines: MOTUL 8100 X-clean 5W-40 has synthetic base stocks and

dedicated SAPS levels that generates outstanding oil film resistance, reduces friction in the engine and

provides after treatment devices compatibility. MOTUL 8100 X-clean 5W-40 brings high lubricating properties

such as wear protection and high temperature resistance for better controlled oil consumption. ACEA C3

lubricants achieve extended drain intervals managed by vehicles on-board computer. Numerous OEMs

such as KIA / HYUNDAI, HONDA, MITSUBISHI, NISSAN, SUZUKI, SSANGYONG,… recommend an

ACEA C3 lubricant for most of their vehicles especially Diesel engines with DPF.


GENERAL MOTORS dexos2TM standard is suitable for the whole range of GM Diesel engines

(including DPF versions) and most of GM Gasoline engines from Model Year 2010. Also, GM dexos2TM f

ully supersedes and replaces previous GM specifications: GM-LL-A-025 (Gasoline) and GM-LL-B-025

(Diesel).


The MB 229.51 requires among many other severe constrains from the lubricant a reduced content of

Sulfated Ash, Phosphorus and Sulphur in order to be compatible with MERCEDES exhaust gas after

treatment systems. The specification MB 229.51 applies to some MERCEDES Gasoline engines, and to

all MERCEDES Diesel engines, with or without DPF.


RENAULT has developed RN0700 and RN0710 standards for oils able to endure the most severe thermal

constrains along with modern after treatment systems compatibility.


The Renault RN0700 standard applies to all Naturally Aspirated Gasoline engines (except Renault Sport)

of RENAULTGroup (Renault, Dacia, Samsung).


The RN0700 specification applies also to all RENAULT Diesel cars fitted with 1.5L dCi engines without

DPF (Diesel Particulate Filter) having less than 100 hp output and 20 000 km or 1-year oil drain interval.


The Renault RN0710 standard applies to all Turbocharged Gasoline, Renault Sport and Diesel without

DPF engines of RENAULT Group (Renault, Dacia, Samsung).


The RN0710 specification does not apply to RENAULT Diesel cars fitted with 1.5L dCi engines without

DPF having less than 100 hp output and 20 000 km or 1-year oil drain interval which specifically require

a RN0700 lubricant. For the 2,2L dCi with DPF, use only an approved RN0710 lubricant, not a RN0720.


MOTUL 8100 X-clean 5W-40 meets the performance of the BMW Long Life-04 standard of the BMW

Group for BMW, MINI and ROLLS-ROYCE vehicles until the model year 2019 i.e. up to End of 2018 only.

For models from 2019 onward requiring an approved BMW LL-04 lubricant, products such as MOTUL

8100 X-Clean+ 5W-30, MOTUL 8100 X-Clean EFE 5W-30, 8100 X-Clean Gen2 5W-40 or Specific LL-04

5W-40 must be used.


The FIAT 9.55535-S2, T2 and GH2 performance level imposes the engine oil to combine both ACEA C3

standard and 5W-40 viscosity grade in order to perfectly lubricate some Gasoline engines of FIAT,

ALFA-ROMEO, and LANCIA produced from July 2007.


The MS-12991 performance level mirrors these FIAT specifications for CHRYSLER vehicles.


The FORD WSS-M2C917-A specification is required for FORD Galaxy 1.9L TDI until MY2006; and for

FORD Ka from MY2008 to 2016.


Specifications VW 505 00 and VW 505 01 require outstanding detergent/dispersant power, high oil film

resistance and better viscosity increase resistance due to soot in order to cover many old Diesel engines

and especially Diesel engines with unit pump injector systems (fixed oil drain interval) and Diesel with

indirect injection systems. Eventually MOTUL 8100 X-Clean 5W-40 can be recommended on those old

VAG group Diesel engines when a VW 505 00 or VW 505 01 lubricant is required.


RECOMMENDATIONS


Drain interval: according to manufacturers’ recommendations and tuned to your own use.

Do not mix with lubricants not ACEA C3 compliant.

Before use always refer to the owner manual or handbook of the vehicle.


STANDARDS


ACEA C3

API SERVICE SN

GENERAL MOTORS GM dexos2™ (replaces GM-LL-A-025 & B-025) under n°

GB2B0325011

MERCEDES-BENZ MB-Approval 229.51

RENAULT RN0710 - RN0700 (under N° RN0710-20-23 / under N°

RN0700-20-28)

OE PERFORMANCES

BMW LL-04 (For model year up to End of 2018 only)

CHRYSLER MS-12991

FIAT 9.55535-GH2, 9.55535-S2, 9.55535-T2

FORD WSS-M2C917-A

VW 505 00 505 01


California Prop 65

https://oehha.ca.gov/proposition-65

We are advised to inform customers purchasing products to be shipped to the State of California about Proposition 65- Prop 65 requires California to publish a list of chemicals known to cause cancer, birth defects or other reproductive harm. This list, which must be updated at least once a year, has grown to include approximately 900 chemicals since it was first published in 1987. The list may be accessed by visiting the website link above. 

All product brands, brand names, brand logo's and any such related marks mentioned or used on this website are considered legally registered trademarks and licensed products owned by their respective owners as such and use herein in no way indicates any relationship between the holders of said trademarks and Oil Depot, LLC.