10W-50 300V2 Factory Line Racing Full Syn
TYPE OF USE
High performance lubricant developed for « Factory Team’s » and designed to offer maximum power output,
better clutch “grip” control with outstanding engine and gearbox protection when running under all types of
extreme conditions.
For 4 stroke engines with or without an integrated gearbox and wet clutch or dry clutch.
Racing engines operating at very high temperature and from low to high revs: Speed bikes, MotoGP,
SuperSport, Super-bike, uphill, hill climb, Dirt bikes, Cross bikes MX, …
Other use: ATV’s, UTV’s
PERFORMANCES
STANDARDS Above existing standards
PERFORMANCES JALOS - Wet clutch compatibility checked on JASO T903 test.
The Organic base using non-fossil renewable materials is limiting the environmental impact.
Carbon footprint is reduced by 18% during the manufacturing process.
ESTER Core® TECHNOLOGY
For decades MOTUL has developed high performance synthetic Ester based lubricants.
By selecting esters over other high performance synthetic base stocks and combining them with an
innovative additive package, MOTUL has created a perfect synergy.
This most advanced ESTER Core® Technology allows maximum power output of the engine without
compromising reliability and wear.
OFF ROAD USE BENEFITS
- INCREASED TORQUE - Low oil film traction at low revolution speed.
Torque improvement above 1% against a 15W-60 used as reference oil measured on Honda 450
CRF engine mounted on the dynamometer.
Motul 300V² 4T Factory Line 10W-50 increases the torque allowing faster acceleration and better
control of the bike.
- INCREASED CLUTCH GRIP - Optimized friction control.
The JASO T903 test evaluate the frictional performance of the clutch and fluid combination over a wide
speed range.
Motul 300V² 4T Factory Line 10W-50 showed 2.3 % of friction improvement against a competitor 10W-50
used as reference oil thus allowing better motricity and traction control in tough riding conditions.
- INCREASED GEARBOX RELIABILITY - High shear stability of the oil film.
The FZG (Forschungsstelle für Zahnrader und Getriebebau) Test, evaluates fluid lubricating and wear
protection properties at the interface of a loaded set of gears.
Motul 300V² 4T Factory Line 10W-50 based on an innovative anti-wear additives package showed
very strong shear stability and protection performance with only 0.26% of pitting on one gear tooth out
of 16 after the 300 Hours run at 3000 rpm.
ON ROAD USE BENEFITS
- INCREASED MAXIMUM POWER OUTPUT - Low oil film friction at high revolution speed.
Power improvement of 1.3 hp @ 14000 tr/mn against a competitor 10W-50 used as reference oil on
Suzuki GSX-R 1000cc engine mounted on the dynamometer.
Motul 300V² 4T Factory Line 10W-50 increases the engine power output allowing faster throttle
response, higher straight line and cornering speeds.
- INCREASED OIL DURABILITY - Optimized oxidation stability and protection.
The PDSC (Pressure Differential Scanning Calorimeter) test method evaluates the oxidation induction
time of the oil subjected to high pressure and temperature (210°C) under static atmosphere.
Motul 300V² 4T Factory Line 10W-50 showed an induction oxidation time of 176.8 minutes outperforming
by 44% the competitor 10W-50 used as reference oil.
The Daimler Oxidation Test method evaluates the oxidation time of the oil subjected to a combination
of high temperature (156°C), air flow (10L/h) and catalyzer.
Motul 300V² 4T Factory Line 10W-50 showed outstanding oxidation resistance and stay in grade
performance over the 168 Hours cycle by remaining in the 10W-50 grade when the competitor 10W-50 used
as reference oil has been dropping significantly to a 10W-40 grade.
Motul 300V² 4T Factory Line 10W-50 allows higher running temperature without compromising engine
protection.
- CONSTANT ENGINE PERFORMANCE -Improved engine cleanliness.
The Panel Coker Test methods evaluates the tendency of the oil to form deposits when in contact
with high temperature surfaces (320°C).
Motul 300V² 4T Factory Line 10W-50 showed very low coke deposit level with a merit rating
outperforming by 7.6% the competitor 10W-50 used as reference oil.
Motul 300V² 4T Factory Line 10W-50 allows outstanding engine cleanness and constant performance
over the drain interval.
RECOMMENDATIONS
For optimum engine and gearbox performance, avoid mixing with other synthetic or mineral
lubricants.
Oil change: according to your own use.
California Prop 65
https://oehha.ca.gov/proposition-65
We are advised to inform customers purchasing products to be shipped to the State of California about Proposition 65- Prop 65 requires California to publish a list of chemicals known to cause cancer, birth defects or other reproductive harm. This list, which must be updated at least once a year, has grown to include approximately 900 chemicals since it was first published in 1987. The list may be accessed by visiting the website link above.
All product brands, brand names, brand logo's and any such related marks mentioned or used on this website are considered legally registered trademarks and licensed products owned by their respective owners as such and use herein in no way indicates any relationship between the holders of said trademarks and Oil Depot, LLC.
View Cart {{shoppingcart.totalQuantityDisplay}} Item(s)
10W-50 300V2 Factor...