5W-30 8100 Eco Clean+ Full Syn
TYPE OF USE
High performance 100% Synthetic Fuel Economy Engine Oil specially designed for the latest generation
cars, powered by Diesel and Gasoline engines, naturally aspirated or turbocharged, indirect or direct injection,
Euro 4, 5 and 6 emission regulation compliant, requiring an ACEA C1 engine oil, low friction, low HTHS
(< 3.5 mPa.s) viscosity oil and "Low SAPS" with reduced content of Sulfated Ash (≤ 0.5%), Phosphorus
(≤ 0.05%) and Sulfur (≤ 0.2%).
Suitable for any type of Diesel and Gasoline engines calling for "Fuel Economy" lubricants: ACEA C1 standard.
Compatible with catalytic converters and Diesel Particulate Filters (DPF).
May be unsuitable for use in some engines. Always refer to the owner manual or handbook if in doubt.
PERFORMANCES
STANDARDS ACEA C1
APPROVALS FORD WSS-M2C934-B
JAGUAR LAND ROVER STJLR.03.5005
PERFORMANCES JALOS DL-1
RECOMMENDATIONS MAZDA
Engines compliant with Euro 4, 5 and 6 emission regulations are fitted with sensitive exhaust gas after
treatment systems. Indeed, Sulfur and Phosphorus inhibit catalytic converters operation leading to inefficient
exhaust gas treatment, and Sulfated Ashes clog DPFs leading to shorten regenerating cycle, quick oil aging,
higher fuel consumption and engine power loss.
JLR - Jaguar and Land Rover, have introduced their own engine oil specifications under the STJLR banner
and the FORD WSS-M2C934-B specification has now been morphed for Jaguar and Land Rover into the
specification STJLR.03.5005.
The STJLR.03.5005 specification requires high level of oil film resistance, anti-oxidation, anti-wear and
detergent/dispersant properties from the lubricant as well as a significant fuel economy performance: at least
3.0% Fuel Economy improvement versus a 15W-40 reference oil.
The STJLR.03.5005 specification applies to all JAGUAR and LAND ROVER latest generation of 2.2L TD4,
2.7L and 3.0L V6 Diesel engines with DPF produced from MY2012 and whenever the specification FORD
WSS-M2C934-B is required from MY2006.
MAZDA recommendations require to use an approved JASO DL-1 or ACEA C1 lubricant in order to
guarantee Fuel Economy benefits and a perfect durability for most of their recent Diesel with DPF engines
from MY2005. For Mazda SKYACTIV-D 2.2L engines from MY2012 the specification ACEA C3 in viscosity
grades 0W-30 or 5W-30 is required, the product MOTUL 8100 X-clean EFE 5W-30 is to be recommended.
ACEA C1 lubricants are environment friendly and reduce fuel consumption, minimizing greenhouse
gases (CO2 ) emission and also achieve extended drain intervals managed by vehicles on-board computer.
RECOMMENDATIONS
Drain interval: according to manufacturers’ recommendations and tune to your own use.
Do not mix with non ACEA C1 compliant lubricants.
Before use always refer to the owner manual of the vehicle.
California Prop 65
https://oehha.ca.gov/proposition-65
We are advised to inform customers purchasing products to be shipped to the State of California about Proposition 65- Prop 65 requires California to publish a list of chemicals known to cause cancer, birth defects or other reproductive harm. This list, which must be updated at least once a year, has grown to include approximately 900 chemicals since it was first published in 1987. The list may be accessed by visiting the website link above.
All product brands, brand names, brand logo's and any such related marks mentioned or used on this website are considered legally registered trademarks and licensed products owned by their respective owners as such and use herein in no way indicates any relationship between the holders of said trademarks and Oil Depot, LLC.
View Cart {{shoppingcart.totalQuantityDisplay}} Item(s)
5W-30 8100 Eco Clea...