Today’s engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine’s performance.
Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most.
Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine.
Application
Castrol EDGE 5W-30 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends an ACEA A5/B5, ACEA C2, API SP, ILSAC GF-6 or earlier specification 5W-30 lubricant.
Castrol EDGE 5W-30 is approved for use in General Motors gasoline vehicles that require a 5W-30 lubricant approved to GM dexos1™ Gen 3* specification *GM dexos1™ Approved-GEN 3 : D355ANDB082.
Please refer to your owners handbook.
Advantages
Castrol EDGE 5W-30 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today’s modern vehicles requiring a high level of protection and higher performance oils.
Castrol EDGE 5W-30:
- Transforms to be strongest when the pressure is highest, protecting your engine.
- Reduces power-robbing friction across engine speeds and conditions.
- Independently tested at the highest standards for proven performance.
- Recommended by world-leading car manufacturers.
- Protects the engine for the entire drain interval even under extreme pressure.
Product Performance Claims
ACEA A5/B5, C2
API SP
ILSAC GF-6
Meets Chrysler MS 13340/ MS 6395
Meets Ford WSS-M2C946-A/ WSS-M2C946-B1/ WSS-M2C961-A1
HondaHTO-06
GM dexos1™ Gen 3
Jaguar Land Rover engine oil specification engine oil specification STJLR.03.5003
Storage – All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, exposed to hot sun or freezing conditions.
