MOTUL DOT 4 LV (Low Viscosity) is especially recommended for use in hydraulic brake and clutch systems of vehicles fitted with ESP (Electronic Stability Program), ABS (Anti-lock Braking System), and ASR (Acceleration Slip Regulation) with a high boiling point and outstanding performance at very low temperatures.
Performances
Standards FMVSS 116 DOT 3 / 116 DOT 4
ISO 4925 (Classes 3, 4 & 6)
SAE J1034 / J1703 J1704
Approvals
ALPINE, AUDI, BMW, CITROËN, DACIA, DS (CAPSA), FORD, Jaguar / Land Rover, JEEP, LAND ROVER, MERCEDES-BENZ, MINI, PEUGEOT, RENAULT, SEAT, SKODA, TOYOTA, VOLVO, VW
Benefits
- MOTUL DOT 4 LV high wet boiling point (172°C / 242°F) is superior to conventional fluids DOT 3 (140°C / 284°F mini) and conventional DOT 4 (155°C / 311°F mini) and therefore enables longer product lifetime. Indeed, DOT 3, DOT 4 brake fluids have the property to absorb humidity contained in the air, which reduces their boiling points and consequently security.
- The wet boiling point is representative of the fluid after one year of use.
- Specially designed for ESP, ABS and ASR
- The viscosity of MOTUL DOT4 LV (675 mm²/s at -40°C / -40°F) lower than conventional DOT 4 (up to 1800 mm²/s), DOT 3 (up to 1500 mm²/s) and DOT 5.1 (up to 900 mm²/s) brake fluids allows an easier fluid circulation in micro-valves of anti-locking systems for better response of ESP, ABS and ASR.
- Perfectly neutral with seals used in braking systems. Anti-corrosion.
Recommendations
- Mixable with DOT 3, DOT 4 and DOT 5.1 NON SILICONE BASE products.
- Do not mix with silicone (DOT 5 silicone base) or mineral base fluids (LHM).
- Store brake fluid in its original container, tightly closed to avoid absorption of moisture.
- Aggressive chemical product if contact with hands, paint or varnish.
- If skin contact, rinse thoroughly with water.
- Drain Interval: 12 to 24 months as per manufacturer’s recommendations.
