5W-30 8100 Power Full Syn
TYPE OF USE
High Performance 100% Synthetic - ESTER engine oil inspired from the competition and specially
designed for Gasoline or Diesel engines, tuned or high performance, naturally aspirated or turbocharged,
indirect or direct injection, and operating over a wide range of engine revs and temperatures, in the most
severe road or racing conditions.
Suitable for Gasoline and Diesel engines requiring an API SP viscosity grade 5W-30 lubricant.
The exclusive formula of MOTUL 8100 POWER 5W-30 is compatible with biofuels (especially the Ethanol
E85) and after-treatment systems. It also protects downsized engines from the risk of LSPI (Low Speed
Pre-Ignition), and its low viscosity optimizes engine response and maximum power.
Very good compatibility with catalytic converters.
Suitable for all types of Gasoline fuels, leaded or unleaded, Ethanol, LPG, Diesels and biofuels.
This type of oil may be unsuitable for use in some engines. Before use always refer to the owner’s manual.
PERFORMANCES
STANDARDS API PERFORMANCE SP
ESTER Technology: 100% Synthetic formula derived from competition and based on Ester ensuring
outstanding oil film resistance at very high temperatures for maximum engine power and torque, as
well as maximum wear protection. Stable oil pressure whatever the conditions of use, road or racing.
Turbocharged gasoline engines with direct injection have a certain risk of sporadic pre-ignition phenomena
in the combustion chambers. This type of sporadic abnormal combustion resembles metallic noise from
combustion chambers and is sometimes associated with a short power loss. This phenomenon called
LSPI for Low Speed Pre-Ignition, or also Rumble, generates very high pressure peaks in the combustion
chamber that can lead to piston damages and ultimately to engine destruction.
For their latest-generation downsized gasoline engines, which are equipped with direct injection systems
and turbo-chargers, API has developed the API SP standard for engine lubricants in order to guarantee
the perfect integrity of these gasoline engines facing the risk of these abnormal combustions.
The API SP standard is fully backward compatible over API SN requirements and all former API standards.
API SP lubricants provide outstanding oxidation resistance, better anti-deposits protection, better engine
cleanliness, anti-wear protection and enhanced performance at cold temperature for Fuel Economy savings
during the whole oil life span. Besides being backward compatible, compare to API SN and API SN Plus,
the API SP standard provides higher performance and especially adds more protection against LSPI
phenomenon for downsized direct injection turbo-charged gasoline engines.
MOTUL 8100 POWER 5W-30 meets all these very highly demanding requirements of performance and
durability, including in particular for API SP standard, the full compatibility to biofuels use such as LPG
(Liquefied Petroleum Gas), CNG (Compressed Natural Gas), and Bioethanol (as available at the station),
when using Ethanol Biofuel at a mix ratio of up to 85% (Bioethanol – E85).
MOTUL 8100 POWER 5W-30 is particularly resistant to high temperatures to allow better control of oil
consumption and provide higher wear protection thanks to its excellent lubricating properties, while providing
increased engine response and fuel economy. The optimized viscosity grade SAE 5W-30 allows faster oil
flow at start up, faster oil pressure build-up, sharper engine revs and faster engine warm-up. Environment
friendly, this type of oil allows fuel consumption reduction and therefore minimizes greenhouse gases
(CO2 ) emissions.
RECOMMENDATIONS
Drain interval: according to manufacturers’ recommendations and to be tuned to your own use.
MOTUL 8100 POWER 5W-30 can be mixed with synthetic or mineral oils.
Before use always refer to the owner manual of the vehicle.
California Prop 65
https://oehha.ca.gov/proposition-65
We are advised to inform customers purchasing products to be shipped to the State of California about Proposition 65- Prop 65 requires California to publish a list of chemicals known to cause cancer, birth defects or other reproductive harm. This list, which must be updated at least once a year, has grown to include approximately 900 chemicals since it was first published in 1987. The list may be accessed by visiting the website link above.
All product brands, brand names, brand logo's and any such related marks mentioned or used on this website are considered legally registered trademarks and licensed products owned by their respective owners as such and use herein in no way indicates any relationship between the holders of said trademarks and Oil Depot, LLC.